Fireproof paint for electrical cable

Fireproof Paint for Electrical Cable – Professional Fire Protection Solution

When electrical wires are near things that could catch fire, you need a safety system that works well and quickly. With a 90-minute fire resistance time, a flame spread ratio of 25, and an FV-0 flame retardant grade, fireproof paint for electrical cable from Henan Banggu Fire Technology offers enterprise-grade performance. Our layer can withstand temperatures of up to 1100°C, keeps the VOC content below 15g/L, and does a great job of insulating without changing how well electricity flows. We offer affordable fire safety solutions for power distribution rooms, office buildings, and industrial facilities all over the world. Our experience in coating making goes back more than 30 years, and we've invested 20 million yuan in research and development facilities.

Why Choose Our Fireproof Paint for Electrical Cable?

Rapid Fire Response & Long-Lasting Protection

You should protect your wires in a way that works when it means the most. When our product comes into contact with flames, it quickly grows, creating a thick layer of carbonised protection. This wall slows the flow of heat, stops short circuits, and keeps fires from spreading along wire lines. When fire resistance goes above 90 minutes, you get important extra time to get out of the building and call for help.

Safe for Electrical Applications

Concerned that the protection might affect how well the wire works? Our recipe keeps its great insulation qualities while staying non-conductive. Once it's dry, it won't affect how well your wire conducts electricity. It's safe to use near live electrical parts, which makes installation open and quick.

Eco-Friendly & Low-Toxicity Formula

Your building's inmates care about the quality of the air inside. The covering we use is water-based, and it has a low smell and almost no VOC emissions. It's safe for sealed areas like cable shafts, equipment rooms, and delivery centers because it's not harmful or polluting. You follow environmental rules without lowering the level of safety.

Technical Specifications

Simple Application Process

No additional equipment is needed to apply our coating. Choose brushing, rolling, or spraying for your job. The paint dries in 1–2 hours and cures in 24 hours. 2–3 coatings at 0.5–1 mm thickness provide maximum protection. One kilogram covers 0.5–0.8 square meters, simplifying project cost calculation.

Use 5–40°C for optimal results. Avoid applying in rain or humidity. The coating sticks to cables, trays, and trenches without breaking or flaking.

Versatile Protection Across Industries

Our fireproof paint for electrical cable serves diverse applications:

• Cable shafts and vertical wire paths in tall buildings
• Shopping malls, hotels, hospitals, and office buildings are all examples of commercial areas.
• Industrial buildings include power plants, substations, and machines for making things.
• Underground systems, tubes, and transit stops are examples of transportation infrastructure.
• For phone calls, there are data centers, computer rooms, and communication hubs.

You can apply the coating directly to both cables and cable trays for comprehensive fire compartmentation.

Quality You Can Trust

We have ISO 9001 certification for quality management, ISO 14001 certification for environmental management, and ISO 45001 certification for health and safety at work. Our goods meet the rules in the Middle East and Southeast Asia and are in line with CE standards. For easy fire safety checks, each batch comes with full paperwork like test results and certificates of conformity.

We are in Changyuan City, which is known as China's "Capital of Anti-Corrosion," and our transport networks work well. We have transportation permits for both land and sea, so we can be sure that your materials will get to your job spot on time.

Comprehensive Support Throughout Your Project

Before Purchase

You receive free product selection consultation and technical documentation support. Our team helps you choose the right coating based on cable type, fire protection requirements, and local regulations.

During Installation

We provide 24/7 remote construction guidance with standardized installation manuals. Our senior engineers offer tailored construction solutions and on-site inspections when needed.

After Completion

You get acceptance documentation assistance and fire safety inspection coordination. We offer lifetime remote technical support, maintenance recommendations, and preferential pricing for repeat orders.

FAQ

Q1: What is cable fireproof coating used for?

A: This applies to cables, trays, and ditches. The thermal barrier it forms when exposed to fire prevents wires from igniting and flame spread, keeping emergency power and lighting systems running.

Q2: What criteria does it meet?

A: Our cable coating satisfies GB 28374-2012 "Fire-Retardant Coating for Cables" standard. Official test reports are included for fire safety inspections and exports.

Q3: Is it water-based or solvent-based?

A: Our formulation is water-based, non-toxic, low-odor, eco-friendly, safe to use, and non-flammable. Excellent for inhabited buildings and confined places.

Q4: Does it transfer electricity or reduce cable insulation?

A: No. The non-conductive covering insulates well. Following drying, the film doesn't impact the cable's electrical insulation, assuring electrical system safety and dependability.

Q5: Can I use it outdoors?

A: It's mostly for inside. We recommend using fire-resistant wrapping, barriers, and cable trays for outdoor or UV-exposed cables, or a UV/weather-resistant coating for installations over 5 years.

Contact Us

Ready to enhance your cable fire safety with Fireproof paint for electrical cable? Contact our technical team for free samples and project consultation.

Email:  banggu@bgfireproof.com