fire retardant paint for cables

Fire Retardant Paint for Cables: Professional Cable Protection Solution

Reliable options are needed to keep your cable system safe from fire risks. Fire retardant paint for cables from Henan Banggu Fire Technology provides protection for large businesses that has been shown to work. Our special layer has a flame-retardant grade A (FV-0) rating of 90 minutes and a flame spread ratio of 25. This product is both safe and environmentally friendly because it has a very low VOC content (≤25g/L) and lasts more than 8 years. With ISO 9001, 14001, and 45001 certifications and more than 30 years of experience making coatings, we can reliably protect power lines, telecommunication systems, and cable trays from fire in industrial, business, and civil settings around the world.

Why Choose Our Cable Fire Protection Coating?

Rapid Fire Response Technology

When our covering comes in contact with flames, it quickly grows to make a thick layer of carbonised protection. This thermal shield stops the flame from spreading and slows down the rate at which the wire insulation heats up. The security you get has been shown to work to stop wire short circuits and fires that spread because of high temperatures.

Safe & Environmentally Friendly

We care about your safety. It doesn't smell bad and doesn't contain any dangerous volatile chemicals in our products. It won't hurt people, the environment, or wire shielding, and it won't pollute either. Global indoor and outdoor environmental standards are met by the water-based solution, which means it is safe for workers to use and for people to live in the building after installation.

Adhesion & Durability

The layer sticks to different types of wire insulation very well and doesn't crack or peel. The film is very flexible (≤1 mm, no cracks), so it can bend with the wire while still protecting it. With strong corrosion resistance against acids, alkalis, and salt spray, as well as good oil resistance (no flaking or rust after 36 hours), it will work well for a long time, even in tough conditions.

Simple Application Process

The building process is easy. When the temperature is between 0°C and 40°C, you can brush, roll, or spray it on. At room temperature, the covering dries quickly. The top layer is dry in one to two hours, and the total fix takes 24 hours. The suggested 0.5–1 mm thickness is usually reached after 2–3 coats. There's no need for fancy tools; it's just like painting normally.

Technical Specifications

Where You Can Use It?

Our fire retardant paint for cables serves diverse applications:

• High-rise buildings: Cable shafts and cable trenches requiring enhanced fire safety
• Commercial facilities: Shopping malls, hotels, hospitals, and office buildings
• Industrial sites: Power plants, substations, and manufacturing facilities
• Transportation infrastructure: Subways, tunnels, and underground equipment rooms
• Telecommunications: Communication cable protection in indoor and outdoor settings

The coating works on both cables and cable trays. Applying it to both elements together creates comprehensive fire-sealing performance throughout your cable management system.

Complete Certification & Compliance

We maintain rigorous quality standards. Our products hold ISO 9001 Quality Management System Certification, ISO 14001 Environmental Management System Certification, and ISO 45001 Occupational Health and Safety Management System Certification. The coating complies with GB 28374-2012 "Fire-Retardant Coating for Cables" national standard, with complete test reports and certificates of conformity for smooth fire safety inspections.

Technical Support You Can Rely On

Before Your Purchase

We provide free samples for performance testing. Our technical consultants offer personalized guidance to help you select the right product based on your cable types, fire protection requirements, and project specifications.

During Your Project

You receive standardized installation manuals and 24/7 remote construction guidance. Our team assists with proper application techniques to ensure optimal performance.

After Installation

We support acceptance documentation, coordinate fire safety inspections, and provide lifetime remote technical support. You get coating renewal guidance and preferential replenishment pricing for long-term partnerships.

FAQ

Q1: What is cable fireproof coating used for?

A: It covers cables, trays, and ditches. After fire contact, it expands to form a thermal barrier that inhibits wires from catching fire and flame spread, preserving emergency power and lights.

Q2: Is it conductive and voltage-resistant? Is cable insulation affected?

A: Non-conductive, good insulating coating. After drying, it doesn't alter cable insulation, maintaining electrical safety and dependability.

Q3: How is it applied and what's the coverage?

A: Brush, roll, or spray. Coverage is 0.5–0.8 kilogram per square metre or 0.2–0.4 kg per cable metre, depending on thickness. Apply 2–3 applications with ≥4 hours between coatings.

Q4: What about water, oil, and weather resistance?

A: It resists water, oil, moisture, heat, and ageing. It suits interior cable trenches, trays, and vertical shafts. It should be used with fire-resistant wrapping and cable trays for outdoor cables.

Q5: Will it pass fire safety tests?

A: Yes. Complete with test results and compliance certifications, it meets national requirements. It passes fire safety assessments when used properly.

Contact Us

Ready to enhance your cable fire safety with fire retardant paint for cables? Contact our technical team at banggu@bgfireproof.com for personalized product recommendations and free samples.