Cable fire protection coating

Cable Fire Protection Coating: Professional Fire Safety Solution for Cable Systems

You need a system that you can count on to keep your important cable equipment safe in high-rise buildings, industrial complexes, or business complexes. The Cable fire protection coating from Henan Banggu has an FV-0 flame retardant rating and provides enterprise-level fire resistance for up to 90 minutes. When our coating comes in contact with flames, it quickly grows, creating a thick carbonised barrier that stops the fire from spreading to other wire bundles and trays. With a service life of at least 10 years, the ability to bend up to 1 mm without cracking, and a long list of certifications, such as ISO 9001, ISO 14001, and ISO 45001, you're picking a solution backed by over 30 years of coating production experience from one of China's top fire protection technology providers.

What Makes Our Cable Fire Protection Coating Different?

You should have more than just basic fire safety. Three important functions are combined in one product: fire resistance, heat insulation, and defence against rust. The mixture makes it very easy for cables to stick to different surfaces while still providing the necessary electrical protection for your system.

This special wire fire protection coating won't affect the conductivity of your wire like other coatings do. It dries quickly at room temperature, which cuts down on the time you need to build something by a lot. It can be sprayed on or brushed on, depending on what works best for your spot.

The covering works well in tough conditions. It doesn't rust or flake when exposed to oils for more than 36 hours. It can stand up to acids, bases, and salt spray. Depending on your needs, this coating can be used to protect power lines, phone wires, or whole cable tray systems.

Technical Specifications

Where You Can Use This Coating

Your cable protection needs vary by location. This versatile Cable fire protection coating serves multiple scenarios:

Commercial Buildings: Cable shafts and trenches in shopping malls, hotels, hospitals, and office buildings require reliable flame barriers. Our coating provides that security layer.

Industrial Facilities: Power plants, substations, and manufacturing sites face higher fire risks. The coating's heat resistance and durability meet these demanding conditions.

Infrastructure Projects: Subway systems, tunnels, and equipment rooms benefit from the coating's long-lasting protection and minimal maintenance requirements.

Indoor Applications: Cable trays, cable bundles, and individual cables in building power distribution systems gain comprehensive fire safety coverage.

Apply the coating to both cables and their supporting trays for enhanced fire-sealing performance. The coating works at temperatures from +5°C to 40°C with relative humidity ≤85%.

Simple Application Process

No specific equipment or training required. How simple application works:

Surface Preparation: Keep substrate temperature 3°C above dew point. Remove dust, grease, and dirt from cables.

Application Method: Brush, roll, or spray depending on project size. Each strategy yields reliable results.

Coverage Rate: Allow 0.5–0.8 kilogram per square metre or 0.2–0.4 kg per cable metre, depending on thickness.

Surface dries 1–2 hours. Cure takes 24 hours. At least 4 hours between coats.

Two to three coats are usually needed to obtain 0.5–1 mm thickness.

A water-based composition means little odour during application and safe indoor usage after drying. Water-based versions fulfil high environmental criteria with VOC levels ≤120g/L.

Why Engineering Teams Choose Banggu?

Proven Experience: We're fire protection veterans. We draw on Henan Tiantan Anti-corrosion Co., Ltd.'s 30 years of coating production experience. That experience yields reliable formulas.

Complete Certification Package: Fire safety inspections need project documentation. ISO 9001, ISO 14001, ISO 45001, and CE certifications are available. Official test findings show our goods satisfy GB 28374-2012 national requirements.

Technical Support: Free samples and one-on-one technical assistance before purchasing. Standardised installation advice and 24/7 remote support are provided during construction. We coordinate acceptance documents and fire safety inspections after completion.

Flexible customisation: Need specific colours, packaging, or formulations? We offer OEM and ODM services suited to your project and market.

Effective Logistics: We have land and marine transportation permits for dependable domestic and international shipping in Changyuan City, with transportation networks.

FAQ

Q1: What is cable fireproof coating used for?

A: It swells to produce a thermal barrier in cables, trays, and ditches when used with fire. This prevents wires from igniting and flame spread, maintaining emergency power and lights.

Q2: What criteria does it meet?

A: Our coating fulfils GB 28374-2012 "Fire-Retardant Coating for Cables" standard. Official test reports are included for fire safety inspections and regulatory compliance.

Q3: Is it water-resistant and weather-resistant?

A: Yes, the coating resists water, oil, moisture, heat, and ageing. Indoor use in cable trenches, trays, and vertical shafts is its main purpose. We propose adding UV and weather-resistant devices to outside cables over 5 years.

Q4: Does it impact cable conductivity or insulation?

A: Absolutely not. Non-conductive coating provides great insulation. After drying, the coating doesn't affect cable insulation, ensuring safety and dependability.

Q5: Does it pass fire safety tests?

A: Absolutely. Our coating passes fire safety inspections when applied properly. We give test results and conformance certifications to help your approval procedure.

Contact Us

Ready to protect your cable infrastructure with Cable fire protection coating? Contact our technical team at banggu@bgfireproof.com for product selection guidance, samples, or project-specific recommendations.