Fire retardant paint for cable

Fire Retardant Paint for Cable - Professional Cable Fire Protection Solution

Fire retardant paint for cables from Henan Banggu can help you protect your electrical equipment. Our wire fire protection system was designed by coating experts with more than 30 years of experience. It has an FV-0 flame retardant grade and a fire resistance time of at least 90 minutes. When this advanced formula comes in contact with flames, it quickly grows, creating a thick layer of carbonised protection that stops the fire from spreading to power cables, phone lines, and cable boxes. Our solution combines better fire safety with environmental responsibility, with VOC content ≤20g/L and proven performance in offices, hotels, residential buildings, and light industry sites. It is backed by ISO 9001, ISO 14001, and ISO 45001 certifications.

Why Choose Our Fire Retardant Paint for Cable Systems?

Fire Protection Performance

Every second counts when there is a fire. Our product makes a good heat shield that stops fires before they start. When it gets hot, the coating quickly grows, creating a tough, insulating carbon layer that slows the rise in temperature and stops short circuits in the wire.

You are safe because it meets world standards for fire safety. During emergencies, your wires will work longer, giving people more time to get out safely.

Safe and Environmentally Friendly Formula

We care about your safety. That's why our fire safety coating for cables has a low smell and no dangerous volatile substances.

The recipe, which is based on water, is safe for wire insulation materials and won't harm them. Not to worry, you can use it inside. Global standards for protecting the environment are met, and the company has ISO 14001 Environmental Management System Certification.

Easy Application, Fast Results

You don't need any special tools or a lot of experience. You can brush or roll on our fire-resistant layer to make it go on easily. At room temperature, it dries quickly and doesn't sag or drip.

Because the layer is only 0.5 to 1 mm thick, you need less material for each job. This means that costs will go down and work will be done faster. The ease of the process will be appreciated by your assembly teams.

Excellent Adhesion and Durability

Our Fire retardant paint for cable adheres well to different types of cable insulation once it has been applied. Oil, acids, alkalis, and salt spray can't damage the layer.

It stays bendable (≤1 mm without cracks) and won't flake off over time. You get safety that lasts and works when you need it most. The coating doesn't change the electrical conductivity or insulation qualities of the wire, so your systems will keep working normally.

Technical Specifications

Where You Can Use It?

Our cable fire protection coating works perfectly in multiple settings:

• High-rise buildings: Cable shafts and vertical trenches
• Commercial spaces: Shopping malls, hotels, hospitals, office buildings
• Industrial facilities: Power plants, substations, manufacturing sites
• Infrastructure projects: Subways, tunnels, equipment rooms
• Residential complexes: Multi-unit buildings and apartment towers

Apply it to both cables and cable trays together for enhanced fire-sealing performance.

Application Guidelines

Getting the best results is simple when you follow these steps:

Surface Preparation: Clean cable surfaces to remove dust, oil, and debris.

Application Conditions: Work in temperatures between 0–40°C. Avoid rainy, humid, or condensation-prone conditions. Ensure substrate temperature is ≥3°C above dew point.

Coating Application: Apply 2–3 coats by brushing or rolling until you reach the desired thickness. Coverage is approximately 0.5–0.8 kg per square meter.

Drying Time: Surface dries in 1–2 hours. Allow 4 hours between coats. Full cure takes 24 hours.

Indoor Use: Our standard formula works best indoors where UV and weather resistance aren't required. For outdoor applications lasting more than 5 years, consider adding a UV/weather-resistant finish layer.

Backed by 30+ Years of Expertise

Henan Banggu Fire Protection Technology inherits over three decades of coating manufacturing excellence from Henan Tiantan Anti-corrosion Co., Ltd. We've transformed traditional expertise into modern fire protection innovation.

Our facility in Changyuan City—China's "Capital of Anti-Corrosion"—benefits from excellent transportation networks and strong industrial resources. We hold both land and sea transportation permits, ensuring reliable delivery to your location.

Complete Quality Certifications

You deserve confidence in your fire protection investment. That's why we maintain:

• ISO 9001 Quality Management System Certification
• ISO 14001 Environmental Management System Certification
• ISO 45001 Occupational Health and Safety Management System Certification
• CE Certification for international markets

Our products meet regulatory requirements across the Middle East and Southeast Asia, giving you reliable global market access.

FAQ

Q1: What is cable fire retardant paint used for?

A: In cables, cable trays, and cable trenches, it expands when heated to provide a thermal barrier, preventing wires from catching fire and halting flames, assuring emergency power and illumination.

Q2: How many coats are typical?

A: 2–3 coats to desired thickness. Before applying the next coat, let it cure for 4 hours.

Q3: Does it resist water, oil, and weather?

A: Aqua-, oil-, heat-, and age-resistant. Fits interior cable trenches, trays, and vertical shafts.

Q4: Will fire safety inspection pass?

A: Compliance with national standards, comprehensive paperwork (test reports + certificates of conformity), and building in line with legislation will pass the fire safety inspection.

Q5: Does it poison? Is it smelly?

A: After drying, water-based products are non-toxic and non-volatile and smell mild. Indoor usage in inhabited buildings is safe.

Partner with Banggu for Complete Support

When you choose our product, you're not just buying a product. You're gaining a partner committed to your success.

Pre-sales Support: We provide free product selection consultation, technical documentation, and assistance with project design submissions.

During Installation: Access 24/7 remote construction guidance and standardized installation manuals.

After-Sales Service: We help with acceptance documentation, fire safety inspection coordination, and remote troubleshooting.

Our senior engineers offer tailored construction solutions and fire resistance calculation verification for complex applications.

Contact Us

Ready to enhance your cable fire protection with Fire retardant paint for cable? Contact our technical team at banggu@bgfireproof.com for product samples, technical documentation, and personalized project consultation.