fireproof coating for wood

Fireproof Coating for Wood: Professional Fire Protection Solutions

When you need to keep wooden buildings safe from fire, you need a reliable option that is also effective. Because we've been making coatings for over 30 years, our fireproof coating for wood offers enterprise-level fire protection. This coating protects your board surfaces reliably for more than 8 years and has a fire resistance time of at least 1.5 hours and Class A non-combustible performance according to GB 8624-2012. This formula has a low VOC content (≤100g/L), a surface that dries quickly (≤4h), and corrosion resistance grade 1. These properties make it perfect for public and commercial uses that need to meet safety standards and last for a long time.

Why Choose Our Wood Fireproof Coating?

Fire Protection Performance

You get professional-level fire protection that really works when you need it to. When our coating is put near fires, it quickly spreads and forms a thick layer of carbon that protects the wood below. This method slows down the passage of heat and delays burning, giving you valuable time to get out of the building and get help in case of an emergency.

International fire safety standards are met by the layer. It gets a Class A grade for not being flammable and stays fire-resistant for more than 1.5 hours. Commercial buildings, industrial facilities, and private projects can all rely on this safety.

Safe and Environmentally Friendly

Care about your health and the world around you. Because of this, our recipe has few volatile chemicals and a low smell. You're picking a green product that meets global environmental standards since the VOC content is only ≤100g/L.

We are certified as an ISO 14001 Environmental Management System. The finish is safe to use both inside and outside because it is non-toxic. It's safe to use in homes, schools, hospitals, work, and public spaces.

Fast and Easy Application

In building projects, time is money. In just 4 hours, the top of our product dries, and it's fully cured in 24 hours. Spraying it on or rolling it on will work best for your job.

The covering sticks well and goes on easily. It gives a smooth finish that doesn't crack or flake. Your building crew will like how quickly and easily it can be used.

Long-Lasting Durability

You are putting money into a good idea. This covering protects for a long time because it has a service life of more than 8 years and a rust resistance grade 1. It won't wear down and will keep protecting you even in harsh conditions.

For indoor uses, the covering works reliably for its entire life. We suggest adding a protection topcoat system for UV and weather defence if you plan to use it outside for more than 5 years.

Comprehensive Quality Certifications

We back up our goods with certificates that are known all over the world:

ISO 9001: System for Quality Management, ISO 14001: System for Environmental Management, ISO 45001: System for Occupational Health and Safety Management, and CE Certification

With these qualifications, you can be sure that the goods you buy will meet strict global standards for quality, safety, and caring for the environment.

Technical Specifications

Application Guidelines

Suitable Surfaces

Our coating works perfectly on various wooden surfaces including:

• Wooden doors and window frames
• Wood structural beams and columns
• Decorative wood panels
• Furniture and cabinetry
• Wooden equipment housings

Construction Conditions

For best results, apply the coating when:

• Temperature is between 5°C and 40°C
• Relative humidity stays below 85%
• Substrate temperature is at least 3°C above dew point
• Surface is clean, dry, and free from dust or grease

Storage Requirements

Store your fireproof coating for wood properly to maintain its quality:

• Keep in ventilated areas between 5–45°C
• Shelf life is 12 months for water-based formulas
• Protect from freezing and direct sunlight
• Keep containers sealed when not in use

Full-Service Support Throughout Your Project

Before You Buy

We provide free product consultation to help you select the right solution. Our technical team offers documentation support including test reports and certification files. We'll assist with project design submissions and approval processes.

During Construction

You get 24/7 remote guidance whenever you need it. We provide standardized installation manuals and detailed technical instructions. Our team is always ready to answer your questions.

After Completion

We help with acceptance documentation and fire safety inspection coordination. You receive remote troubleshooting support and maintenance recommendations. We offer preferential pricing for future replenishment orders.

FAQ

Q: What exactly is fireproof coating, and what is its core function?

A: Fireproof coating is functional and fire-resistant. It forms a heat-insulating and oxygen-isolating coating on wood surfaces during fires. It slows wood ignition and damage, allows time for personnel escape and fire rescue, and lowers fire spread and property losses.

Q: Does fireproof coating prevent all fires?

A: No. The main purpose is to "retard flame, insulate heat and slow down fire spread," not "extinguish fire" or "prevent fire from happening." It can't stop fires, but it can slow wood burning. It speeds evacuation and rescue and reduces fire damage. Not absolute protection, but supplemental.

Q: Are fireproof coatings toxic? Should I take precautions during construction?

A: Nationally certified coatings are non-toxic and odourless. Small quantities of dust and volatile vapours are produced during coating construction. Construction workers need masks, gloves, and goggles and enough ventilation. To avoid coating gas irritation, let construction dry completely before using.

Q: What is the drying time for fireproof coating?

A: Coating type, thickness, and atmosphere affect drying time. At 25℃ and 50% humidity, surface drying takes 2-4 hours and total drying takes 24-48 hours. Avoid rain, sun, and impact during drying. Maintain ventilation, avoid open flames, and prevent dust from sticking to the undried surface.

Q: How long does fireproof coating last? Do I need to reapply after expiration?

A: Indoor coating lasts 5-8 years with regular care, but outdoor coating lasts 3-5 years owing to environmental variables. Check coating after expiry. Clean and reapply if there are cracks, peeling, or chalking. If the coating is intact, minor repairs can extend service life.

Contact Us

Ready to protect your wooden structures with fireproof coating for wood? Contact our team at banggu@bgfireproof.com for product samples, technical consultation, and project support.