Finishing type fire retardant coating for interior walls

Finishing Type Fire Retardant Coating for Interior Walls

Professional fire safety equipment from Henan Banggu Finishing type fire retardant coating for interior walls made for wood, plywood, MDF and plasterboard, which can catch fire. This coating can fight fire for at least half an hour and has a smoke toxicity grade of t0. When it comes into contact with fire, it expands quickly, creating a thick layer of carbonised insulation that slows the spread of the flame. Scratch resistance of at least 1,000 cycles, Grade 1 stickiness, and pencil hardness of at least 2H are all good for your project. Our covering has an ISO 9001, ISO 14001, and ISO 45001 certification, a low VOC content (≤80 g/L), a surface that dries in ≤2 hours, and a spread of 4–6 m²/kg.

Why Choose Our Fire Retardant Coating?

You need fire safety that works well without sacrificing looks. Our products makes the walls safe and attractive at the same time.

Fire Protection

When flames touch the surface, the covering foams and quickly grows bigger. This makes an insulation layer that doesn't catch fire and slows the spread of fire. You get useful time to evacuate while keeping your valuable things safe. As long as the fire growth rate measure stays at 250, it meets the standards for fire safety around the world.

Exceptional Durability

Places with a lot of foot traffic need tough finishes. This mixture doesn't break down after more than 1,000 scrub rounds. The hard finish doesn't scratch or wear down easily, so it will keep looking good and protecting your things for years to come.

Environmentally Safe Formula

Your home air condition is important. This water-based covering doesn't have any volatile chemicals that are dangerous and doesn't smell bad when it's being applied. It meets world standards for environmental protection and is safe for both people living in it and people installing it.

Flexible Application

If your job calls for it, you can use a brush, roller, or spray to apply it. It's dry enough to touch in two hours, and it's fully set in twenty-four hours. You can choose your own colours or use standard white. Later, you can cover it with latex paint or finish without changing the fire safety.

Technical Parameters

Ideal Applications

Your project deserves proven fire protection. This Finishing type fire retardant coating for interior walls serves multiple environments:

• Hotels and guesthouses requiring code compliance
• Shopping malls with combustible ceiling materials
• Schools and hospitals prioritizing occupant safety
• Office buildings with wooden decorative elements
• KTVs and entertainment venues
• Residential buildings with MDF or plywood interiors
• Bamboo product surfaces needing flame retardancy

The coating works on wood, plywood, MDF, ceilings, curtain boxes, wooden joists, and other combustible substrates. It transforms ordinary materials into fire-resistant surfaces while maintaining decorative appeal.

Application Guidelines

Surface Preparation

Clean your substrate thoroughly. Remove dust, grease, and loose particles. The surface should be dry and free from condensation.

Environmental Conditions

Apply when temperature ranges from 5°C to 35°C. Keep humidity below 85%. Avoid application during rain or in damp conditions.

Application Process

Stir the coating well before use. Apply your first coat evenly by brush, roller, or spray. Allow 4 hours minimum between coats. Most projects need 2-3 coats for optimal protection.

Coverage Calculation

Plan for 4–6 m²/kg coverage depending on substrate porosity. Calculate total area and multiply by coating thickness requirements for accurate material ordering.

Finishing Options

Once fully cured (24 hours), you can apply latex paint, varnish, or clear topcoat. The fire protection remains effective beneath decorative finishes.

FAQ

Q: Where is decorative fireproof coating used?

A: Wood, plywood, MDF, ceilings, curtain boxes, wooden joists, bamboo and flammable building materials are its major targets. This enhances fire resistance and slows flame propagation within.

Q: Its difference from steel structure fire-resistant coatings?

A: Wood and flammable substrates receive finishing coats for flame retardancy and ornamentation. Steel structure coatings protect metal frames against fire and heat. There are distinct substrate needs.​​​​​​​

Q: What criteria does it meet? Does it meet fire safety standards?

A: The coating meets GB 20286-2018. Official test results and compliance certifications are included. Application according to specifications passes fire safety inspections reliably.

Q: What are the application methods and drying times?

A: Apply by brushing, rolling, or spraying, like latex paint. Surface drying takes 1-2 hours. The full cure takes 24 hours. For optimal results, wait 4 hours between coatings.

Q: Can latex paint or topcoat be applied after this?

A: Yes, certainly. You can apply latex paint, topcoat, or varnish once the ornamental fire-retardant layer dries. Under additional decorative layers, protective characteristics stay intact, allowing you design versatility.

Contact Us

Ready to protect your interior walls with Finishing type fire retardant coating for interior walls? Reach us at banggu@bgfireproof.com for technical guidance and product consultation today.